12 FAD ELIMINATOR STEEL FOOTED 125 SPINE ARROW SHAFTS & FREE COLD CARBON 72 EPOXY

QUANTITY OF TWELVE

>>>=FIREARM=DISPATCH=ELIMINATOR=>

MACHINED

&

HEAT TREATED

STEEL FOOTED

125 SPINE

ARROW SHAFTS

&

FREE COLD CARBON 72 EPOXY

 

 

 Great for =Antelope=through=Elephant=>

 

 

FAD ELIMINATOR SPECS

 

 PATENT PENDING

FUSION SPINE

CAPACITIES

300-50

 

300 Static Spine Behavior Full Length @ 35.5 Inches

125 Static Spine Actual @ 28 Inches

50 Static Spine capable with separate Pink Tusk Fusion Rod

.001 Straightness @ 35.5 Inches

 Inside Diameter = .2445 (accepts "S Size Lighted Nocks" for example)

22.6 GPI (Grains Per Inch) in first 1/2 inch of shaft with Steel Footing & Insert Core Installed

12.2 GPI in last 35 inches of shaft

 UNCUT 35.5 inch long total arrow shaft weight with 110 grain insert, machined and heat treated steel footing, nock and nock collar installed is approximately = 560 GRAINS

 

FOC

(Forward/Front Of Center)

UNCUT 35.5 INCHES LONG with no fletchings, no feathers, no internal Fusion Rods achieves approximately the following baseline FOC...

UNCUT 35.5 INCHES LONG with a 0 Grain Broadhead (NO BROADHEAD AT ALL) = 10% FOC

 UNCUT 35.5 INCHES LONG with 100 Grain Broadhead = 16% FOC

UNCUT 35.5 INCHES LONG with 200 Grain Broadhead = 20% FOC

UNCUT 35.5 INCHES LONG with 315 Grain Broadhead = 25% FOC

UNCUT 35.5 INCHES LONG with 600 Grain Scientific Method Broadhead = 33% FOC

 

FAD ELIMINATOR COMPONENTS

Proprietary Mammoth SR Stainless Steel Heat Treated Insert Core = 110 Grains

Nock Collar = 15 Grains

Steel Footings = 15 Grains

Nock = 5.5 Grains

 

 

Industry standard 30 inch long and 32 inch long shafts cannot be made longer.  Our 35.5 inch long FAD ELIMINATOR SHAFTS have a static spine of around 300 @35.5 inches long to a static spine of around 125 @28 inches long without any other purchase.  Finger shooters and gap shooters all the way through high speed modern compound bow shooters can use these arrow shafts.  The purchase of these FAD ELIMINATOR shafts alone and nothing else will provide approximately a 300 static spine behavior at 35.5 inches long all the way through approximately a 125 static spine at the standard 28 inch measurement location without any other purchase necessary.   

35.5 inches long = 300 spine behavior

34.5 inches long = 275 spine behavior

33.5 inches long = 250 spine behavior

32.5 inches long = 225 spine behavior

28 inches long = 125 static spine actual

 

>>>=====>

 

 

 

PINK TUSK FUSION RODS & WRENCH MUST BE PURCHASED SEPARATELY

 

With the additional purchase of A) Pink Tusk Fusion Rods and B) Fusion Rod Wrench...the FAD ELIMINATOR can be modified to around a 50 static spine.  The FAD ELIMINATOR is Pink Tusk Fusion Rod compatible and the removable Pink Tusk Fusion Rod can be screwed in and out of the back of the shaft at anytime with the Fusion Rod Wrench.  

PINK TUSK FUSION RODS & WRENCH + FAD ELIMINATOR SHAFT

All measurements @ the standard 28 inch static spine for FAD ELIMINATOR SHAFT

 

Less than 19 inches of Pink Tusk Fusion Rod = No static spine change in FAD ELIMINATOR, but acts as a removable internal footing & for FOC Gains

 

19 inches of Pink Tusk Fusion Rod (all measured from end of the threads of the protruding 70S-50R alloy machined connecting rod) = 110 static spine

 

20.5 inches of Pink Tusk Fusion Rod = 90 static spine

 

22.5 inches of Pink Tusk Fusion Rod = 75 static spine

 

27.5 inches of Pink Tusk Fusion Rod = 50 static spine

 

32 & 5/8 inches long (the full length) of Pink Tusk Fusion Rod = still yields a 50 static spine

 

NOTE: PINK TUSK FUSION ROD & WRENCH MUST BE PURCHASED SEPARATELY