Your cart is empty.
3 FROZEN FAD ELIMINATOR ARROW SHAFTS
$599.99
QUANTITY OF THREE HANDCRAFTED
"FROZEN"
>>>=FIREARM=DISPATCH=ELIMINATOR=>
ARROW SHAFTS
There is a minimum 16 week wait time on this particular handcrafted arrow shaft model.
FROZEN FAD ELIMINATOR
MINIMUM & MAXIMUM ARROW SHAFT LENGTHS
Maximum arrow saw cut off of shaft from front of the shaft = 0 inch cut off the front max
Maximum arrow saw cut off of shaft from back of the shaft = 30.5 inches cut off the back max
Minimum total arrow shaft length = 5 inches long
Maximum total arrow shaft length = 35.5 inches long
(MAKES A 1200 GRAIN TOTAL ARROW WEIGHT WITH OUR 600 GRAIN SM DG BROADHEAD)
FROZEN FAD ELIMINATOR SPECS
PATENT PENDING
FUSION SPINE
CAPACITIES
300-50
300 Static Spine Behavior @ 35.5 Inches
125 Static Spine @ 28 Inches
50 Static Spine with seperate Pink Tusk Fusion Rod
.001 Straightness @ 35.5 Inches
Inside Diameter = .2445 (accepts "S Size Nockturnal Lighted Nocks" for example)
22.6 GPI (Grains Per Inch) in first 4 inches of shaft
12.2 GPI in last 31.5 inches of shaft
UNCUT 35.5 inch long total arrow shaft weight with 110 grain insert, nock and nock collar installed is approximately = 601 GRAINS
FOC
(Forward/Front Of Center)
UNCUT 35.5 INCHES LONG with no fletchings, no feathers, no internal Fusion Rods achieves approximately the following baseline FOC...
UNCUT 35.5 INCHES LONG with a 0 Grain Broadhead (NO BROADHEAD AT ALL) = 12% FOC
UNCUT 35.5 INCHES LONG with 100 Grain Broadhead = 18% FOC
UNCUT 35.5 INCHES LONG with 200 Grain Broadhead = 22% FOC
UNCUT 35.5 INCHES LONG with 315 Grain Broadhead = 27% FOC
UNCUT 35.5 INCHES LONG with 600 Grain Scientific Method Broadhead = 35% FOC
FROZEN FAD ELIMINATOR ARROW SHAFT
Half & Half Baseball Bat Technology to arrow shafting to the =MAX=>
Woven Proprietary Toray USA Prepreg Fused with Proprietary Mammoth 70S-50R Alloy to...
>>>=Perfection=>
FAD ELIMINATOR COMPONENTS
Proprietary Mammoth SR Stainless Steel Heat Treated Insert Core = 110 Grains
Nock Collar = 5 Grains
Industry standard 30 inch long and 32 inch long shafts cannot be made longer. Our 35.5 inch long FAD ELIMINATOR SHAFTS have a static spine of around 300 @35.5 inches long to a static spine of around 125 @28 inches long without any other purchase. Finger shooters and gap shooters all the way through high speed modern compound bow shooters can use these arrow shafts. The purchase of these FAD ELIMINATOR shafts alone and nothing else will provide approximately a 300 static spine behavior at 35.5 inches long all the way through approximately a 125 static spine at the standard 28 inch measurement location without any other purchase necessary.
35.5 inches long = 300 spine behavior
34.5 inches long = 275 spine behavior
33.5 inches long = 250 spine behavior
32.5 inches long = 225 spine behavior
28 inches long = 125 static spine actual
>>>=====>
PINK TUSK FUSION RODS & WRENCH MUST BE PURCHASED SEPARATELY
With the additional purchase of A) Pink Tusk Fusion Rods and B) Fusion Rod Wrench...the FAD ELIMINATOR can be modified to around a 50 static spine. The FAD ELIMINATOR is Pink Tusk Fusion Rod compatible and the removable Pink Tusk Fusion Rod can be screwed in and out of the back of the shaft at anytime with the Fusion Rod Wrench.
PINK TUSK FUSION RODS & WRENCH + FAD ELIMINATOR SHAFT
All measurements @ the standard 28 inch static spine for FAD ELIMINATOR SHAFT
Less than 19 inches of Pink Tusk Fusion Rod = No static spine change in FAD ELIMINATOR, but acts as a removable internal footing & for FOC Gains
19 inches of Pink Tusk Fusion Rod (all measured from end of the threads of the protruding 70S-50R alloy machined connecting rod) = 110 static spine
20.5 inches of Pink Tusk Fusion Rod = 90 static spine
22.5 inches of Pink Tusk Fusion Rod = 75 static spine
27.5 inches of Pink Tusk Fusion Rod = 50 static spine
32 & 5/8 inches long (the full length) of Pink Tusk Fusion Rod = still yields a 50 static spine
NOTE: PINK TUSK FUSION ROD & WRENCH MUST BE PURCHASED SEPARATELY
Current Stock:
